How To Measure And Install Wallpaper?

How To Measure And Install Wallpaper

Wallpaper is a great way to spruce up and update any room in your home. It’s not only affordable, but it also gives you the opportunity to express your creativity with color and pattern.   However, before you buy a roll of wallpaper Singapore at the store or order it online, there are some things that you should know about how to measure for wallpaper. You’ll need to measure across the walls that will be covered in paper before making your purchase because this will ensure that there is enough material on hand for all surfaces and minimize issues with cutting or pasting a pattern onto an uneven wall surface.

Here Are Some Easy Steps On How To Measure And Install Wallpaper:

Here Are Some Easy Steps On How To Measure And Install Wallpaper

Measure The Length And Width Of Your Wall

Measure the length of your wall before you measure the width. This way, you will know how much paper you will need for a full installation.

Purchase Wallpaper That Is Long Enough To Cover Both Dimensions

For a full installation, it is necessary to purchase wallpaper that is long enough. This way, you can purchase one roll and not have to worry about the pattern being cut off when covering the wall.

Measure The Length Of The Area

Measure the length of the area to be covered in order to determine how many columns are needed for your desired pattern. Each column will require a minimum amount of paper that needs to be purchased.

Lay Out The Paper On A Flat Surface

Lay out your paper on a flat surface. This will help you to get an accurate measurement of the length and width, as well as how much paper you’ll need for your desired pattern or design.

Cut Your Wallpaper With A Sharp Knife Or Scissors

To measure and cut wallpaper, start by laying the paper out on a flat surface. Next, use a sharp knife or scissors to cut the paper where needed for your design.

Paste The Paper Onto The Wall Using Wallpaper Paste

To paste paper onto the wall, start by laying the paper out in a straight line. Apply wallpaper adhesive to the back of the paper and then firmly press it onto the wall.

Allow Time For Drying

After you’ve installed your paper, allow time for it to dry before hanging pictures and other decorations on top. You may not want to hang them right away because the weight of the objects will cause wrinkles in the paper and make it hard to remove. If this does happen, use a damp cloth to wipe away excess water and then lay a heavy book or other object on top of the wrinkled area.

If you will be hanging a heavy picture frame or any other weighty decoration on your recently-pasted wallpaper, it’s best to wait 2 full days for the paste’s adhesive to fully set before applying anything too heavy. You should also be sure that you are hanging decorations level. If you hang things at an angle, then the paper may start to peel back around the weight of your decorations.

Conclusion

We outlined some key steps on how to measure and install wallpaper. We hope that you found the information helpful and were able to take away a few new tips for your next DIY project!